You need to test, we're here to help.

You need to test, we're here to help.

17 January 2018

Some PCIe 3.0 Test Examples (Part I)

Protocol and electrical views of  slow electrical response to a preset request
Figure 1: Protocol and electrical views of
slow electrical response to a preset request
We took a tour of a typical PCIe 3.0 testbench setup in a recent post. Now, let's see that testbench in action with some application examples of some common bad behavior one might encounter from a PCIe 3.0 channel. These include: slow electrical response, slow protocol response, and so on.

A Tour of a PCIe 3.0 Test Setup

Test-equipment requirements for PCIe 3.0
Figure 1: Test-equipment requirements for PCIe 3.0
Having examined the complex machinations of PCIe 3.0 dynamic link equalization in earlier posts (see the links below), now we will look at a typical test setup for design and debug and/or compliance testing. Then we will move on to some test examples showing some common problems that one might encounter.

16 January 2018

An Under-The-Hood View of PCIe 3.0 Link Training (Part II)

A diagrammatic view of the PCIe 3.0 dynamic link training process
Figure 1: A diagrammatic view of the
PCIe 3.0 dynamic link training process
Our last post in this series began examining the recovery.equalization process of PCIe 3.0 dynamic link training, beginning with Phases 0 and 1 of the process (Figure 1). Next, we will move on to take a closer look at Phases 2 and 3, where we'll see what can happen with devices in which the algorithms are not up to par. Namely, issues such as packet errors, dropped packets, and link retraining at lower data rates than 8 Gb/s.

PCIe 4.0 PLL Bandwidth Testing

PLL bandwidth testing ensures that the add-in card's PLL bandwidth and peaking are within specifications
Figure 1: PLL bandwidth testing
ensures that the add-in card's
PLL bandwidth and peaking
are within specifications
The final piece of the PCIe 4.0 compliance-test puzzle—at least until PCI-SIG completes its test definitions—is the PLL bandwidth test. This test, which is performed only on add-in cards, verifies that the PLL bandwidth and peaking are within the limits allowed by the PCIe 4.0 specification (Figure 1).

15 January 2018

PCIe 4.0 Receiver Link-Equalization Testing (Part II)

Working out the optimal combination of Tx emphasis presets and receiver CTLE settings
Figure 1: Working out the optimal combination of Tx emphasis
presets and receiver CTLE settings
As may be apparent from our previous post on PCIe 4.0 receiver link-equalization testing, this part of the PCIe 4.0 compliance tests is somewhat involved. When we left off last time, we were in the midst of receiver calibration, looking to ensure that the test-signal eye is as closed as possible without violating the specification limits.

PCIe 4.0 Receiver Link-Equalization Testing (Part I)

PCIe 4.0 receiver link-equalization testing takes place at the site of the channel's worst-case signal
Figure 1: PCIe 4.0 receiver link-equalization testing
takes place at the site of the channel's worst-case signal
In the battery of PCIe 4.0 compliance tests, there is but a single test of receiver behavior: Rx link-equalization testing. Given that our DUT in this test is an add-in card, we want to have our worst-case signal at the Card ElectroMechanical (CEM) connector (Figure 1). The signal then proceeds through the channel on the add-in card to the end point, which is the receiver on the DUT.

PCIe 4.0 Transmitter Link-Equalization Testing

Shown is an overview of the PCIe 4.0 link-equalization response test
Figure 1: Shown is an overview of the PCIe 4.0
link-equalization response test
PCI Express has seen steady, and significant, increases in bit rates in each generational revision. Most recently, bit rates leaped from 8 Gb/s in PCIe 3.0 to 16 Gb/s in the current version 4.0. With these speed increases has come the need for dynamic link equalization, which becomes necessary for the sake of signal integrity. Compliance tests for dynamic link equalization is where things start to get a little more sophisticated, particularly when it comes to PCIe 4.0