Transmission Lines (Part I): Introduction

Figure 1: All oscilloscopes
have a Cal output like the
one pictured here

Somewhere on the front panel of almost any oscilloscope is a "Cal" reference signal output (Figure 1). That signal is really intended for adjusting the capacitance compensation screw to calibrate a 10X high-impedance probe, but most of us know it simply as the Cal signal. Have you ever noticed that the Cal signal's rise time seems to be highly dependent on the length of the cable attached to it, and maybe even wondered why?

Probing Techniques and Tradeoffs (Part XI): Non-Ideal Situations

Figure 1: VP@Rcvr builds a transmission-line model
to virtually move less-than-ideal probing points

In using an oscilloscope to investigate transmission-line performance, we often encounter situations in which we don't have the luxury of probing at the ideal location. Fortunately, there are software tools that enable us to virtually move our probing point close to the receiver.

Probing Techniques and Tradeoffs (Part X): More Best Practices

Figure 1: Chip clips;
they're not just for
snacks anymore

In probing circuits, as with most endeavors, there are some best practices you can use to enhance your chances of obtaining optimal measurements. We began exploring this concept in our last post, and we'll continue here with more best practices.

Probing Techniques and Tradeoffs (Part IX): Best Practices

Figure 1: The typical manner
of using a hands-free probe
holder can cause issues

Having covered many of the theoretical aspects of probing signals, it's now useful to cover some best practices for high-speed active probing. We'll use some examples involving probing of DDR memory to illustrate what works best and what might not be a good idea from a practical standpoint.

Probing Techniques and Tradeoffs (Part VIII): Gain/Attenuation vs. Noise

Figure 1: Noise comparison of a
Teledyne LeCroy D1605 probe and
a competing model

When discussing oscilloscope probes and dynamic range as we've been doing of late, we must also touch upon the associated topics of internal gain/attenuation and how that relates to noise.

Probing Techniques and Tradeoffs (Part VII): More on Dynamic Range

Figure 1: Input offset range is how much
differential offset a probe can apply to
an input signal to bring it within its
differential-mode output range

In our last post in this series, we'd begun discussing the third of three types of dynamic range as applied to probes, and that is input offset range. This is the maximum differential offset that a probe can apply to the input signal to bring it within the probe's differential-mode dynamic range.

Getting The Most Out Of Your Oscilloscope: Physical-Layer Tools

Figure 1: Trigger dialog boxes will
match the protocol of interest

Debugging and validation of the physical layer of serial-data links is a preeminent oscilloscope application area these days. Today's real-time digital oscilloscopes have a wealth of tools to help you dig into any/all serial protocols and learn what's really going on electrically with your serial links.