![]() |
| Figure 1: This schematic represents the signal paths in typical, general-purpose I/Os |
You need to test, we're here to help.
You need to test, we're here to help.
24 January 2018
Measuring Shared On-Die Power Rails
22 January 2018
Setting the Stage for On-Die Power-Rail Measurements
![]() |
| Figure 1: Measuring on-die Vdd rail noise requires a suitably instrumented die and package |
Power-Rail Noise: Small Signal, Big DC Offset
![]() |
| Figure 1: Your scope's vertical adjust has its limits |
19 January 2018
Bandwidth vs. Current Load in Power-Rail Measurements
![]() |
| Figure 1: Connecting a 6" length of coaxial cable between a low-impedance power rail and a 1-MΩ input impedance produces reflections and ringing artifacts on your signal acquisition |
18 January 2018
How 10X Attenuating Probes Kill Signal-to-Noise Ratio
![]() |
| Figure 1: Signal waveforms captured using a 10X attenuating probe (top) and a BNC probe (bottom) with tips open |
Understand RF Pickup When Measuring Power Rails
![]() |
| Figure 1: Teledyne LeCroy's HDO8108A sports a very low noise floor of about 145 μV |
17 January 2018
Some More PCIe 3.0 Test Examples (Part II)
![]() |
| Figure 1: This shows how a PeRT 3 state-machine log can be invaluable in diagnosing timeouts in requests for presets |
Subscribe to:
Posts (Atom)






