Back to Basics: Differential Probing

Figure 1: Emitter voltage measurement
in simplified schematic view

Whether or not we think of it in such terms, any voltage measurement taken with an oscilloscope or voltmeter is, in reality, a differential voltage measurement. A voltage is, by definition, the difference in electrical potential between two points in a circuit. It's impossible to take a voltage measurement with only one voltmeter lead. One lead must be attached to the point of interest while the other must be connected somewhere else as a reference point.

The Realities of Oscilloscope Probes

Figure 1: Teledyne LeCroy's ZS2500

high-impedance active probe

Looking for a good, albeit very expensive, paperweight? Try using an oscilloscope without probes! Probes are often taken for granted but they are one of the most critical elements of the signal chain in any test scenario.

Back to Basics: Sequence Mode

Figure 1: Sequence mode enables fast trigger rates
and optimizes memory usage by
ignoring dead time.

Now and again, an oscilloscope user may need to capture either a large number of fast pulses in quick succession, or a small number of events separated by relatively long periods of time. Either of these scenarios are challenging with typical acquisition modes. Fortunately, most modern oscilloscopes offer what we call "sequence mode" (other oscilloscope makers refer to similar acquisition modes as "fast-frame" or "segmented memory" mode).

Back to Basics: Random Interleaved Sampling

Figure 1: This image illustrates the
general principle underlying RIS.

Modern oscilloscopes come with all kinds of bells and whistles, and users might be tempted to invoke them for all sorts of situations. But not every whiz-bang feature of an oscilloscope is applicable all the time. Rather, some features are great in the right applications but disastrous in others.

Oscilloscope Basics: Sampling Rate

In a recent overview post on oscilloscope banner specifications,
one of the topics covered is sampling rate. Let's do a somewhat deeper dive on that topic and look at what sampling rate means to oscilloscope users.

An Overview of Oscilloscope Banner Specs

"Banner specs" is a term that oscilloscope makers use often. If you've ever met with one of the vendors' salespeople, you're likely to have heard it. But what are banner specs and what do they mean to you?

Oscilloscope Basics: Triggering

At some point, it's likely you've had the experience of capturing a waveform on your oscilloscope only to see a wildly unstable trace displayed on the screen. Chances are that you hadn't adjusted the triggering correctly. Let's take a brief look at what triggering is and why it's important in an oscilloscope. Trigger modes determine when the oscilloscope acquires and what is displayed.