You need to test, we're here to help.

You need to test, we're here to help.
Showing posts with label frequency response. Show all posts
Showing posts with label frequency response. Show all posts

18 January 2021

Situational Awareness: Testing Oscilloscope Outer Limits

Fig 1. 40 ps signal measured full bandwidth on a 1 GHz oscilloscope shows visible over/undershoot.
Fig 1. 40 ps signal measured full bandwidth on a
1 GHz oscilloscope shows visible over/undershoot.
Nothing is perfect. Every test instrument has its limits, and knowing the limits to your oscilloscope’s bandwidth in response to real-world signals helps to develop situational awareness when making measurements. This is especially true when testing signals that are at or very near the specified bandwidth limit of the instrument.

The measurements we’ll demonstrate were made on a WaveSurfer 4104HD, a 12-bit, 4-channel, 1 GHz bandwidth oscilloscope that samples at up to 5 GS/s.

23 February 2018

Transmission Lines (Part II): More on Bandwidth vs. Rise Time

In the frequency domain (right), a near-ideal square wave displays predictable 1/f amplitude dropoff
Figure 1: In the frequency domain (right), a near-ideal
square wave displays predictable 1/f amplitude dropoff
We began this series about transmission lines by thinking about some pertinent principles and relationships that can help form our thinking about the topic. In particular, we'd covered the relationship between bandwidth and rise time and why we have this rule of thumb that says that bandwidth can be estimated using 0.35/10-90% rise time.

14 December 2017

Probing Techniques and Tradeoffs (Part V): Probe Loading

Figure 1: A probe's impedance varies with frequency
Figure 1: A probe's impedance varies
with frequency
Earlier in this series of posts, we alluded to the topic of probe loading, which is an outcome of the fact that to make a measurement, an oscilloscope probe must "steal" some energy from the circuit or device under test. Thus, the probe's tip must have a finite impedance across the frequency range of interest.

20 November 2017

Probing Techniques and Tradeoffs (Part II)

A snapshot of available probes from Teledyne LeCroy
Figure 1: A snapshot of available probes from
Teledyne LeCroy
Our first post in this series concentrated on connectivity and various means by which one might apply an oscilloscope probe to a circuit or device under test. Now, we'll look at an "ideal" probe vs. a real-world probe, and then begin a discussion of probe specifications.