Transmission Lines for Oscilloscope Users, Part 1

Figure 1: The rise time of the Cal signal seems to
increase significantly by increasing the length of the
interconnect cable. Is it true? Click image for details.

This post is the first of a series that will discuss what every oscilloscope user needs to know about transmission lines. It is going to introduce you to the absolutely most important signal integrity principles everybody needs to know when using an oscilloscope to measure signals with rise times shorter than 10 nanoseconds. After demonstrating some easily misinterpreted measurements, we’re going to look “under the hood” at what’s really happening to show you how it's all about the principles of transmission lines. Awhile back, Dr. Eric Bogatin offered a condensed version of What Every Oscilloscope User Needs to Know About Transmission Lines that summed up the key takeaways, but by revisiting “Transmission Lines 101” with us here, we’ll hopefully also show you a different way of thinking about your measurements.

10x Passive Probes and Cable Reflections

Figure 1: With unequal impedances at either end of the coax,
are cable reflections a concern in 10x passive probes?

We've been discussing the ubiquitous 10x passive probe here on Test Happens, beginning with an overview of the probe-oscilloscope system. We turned to the 10x passive probe itself and the issues posed by its constitutive circuitry. Then we covered what about that circuitry makes it usable at all, namely, its built-in equalization circuit.

Transmission Lines (Part III): Essential Principles

Figure 1: All interconnects are transmission lines with a signal
path and a return path (not ground)

Now that we've covered some of the principles and assumptions that underlie transmission lines in two prior posts, we can now directly address the topic with some essential principles that you need to understand.