Five Tips to Improve Dynamic Range

Dynamic range is the ratio of the maximum signal level to the smallest signal level achievable in a measurement.  Tools with good dynamic range are especially helpful for analyzing wide dynamic range signals in which a full-scale signal must be acquired, while at the same time, very small amplitude signal details must be visible. Here are five tips for improving the dynamic range of your measurement instrument.

Feed-Forward Equalization

Figure 1: FFE creates a number of delayed versions of the
input signal that are then added back to the signal with
proper weights

In addition to continuous time linear equalization (CTLE), another means of improving signal quality at the receiver end of a high-speed serial data link is known as feed-forward equalization (FFE). In terms of implementation, FFE is not unlike the pre-emphasis filtering that is done on the transmitter side. An FFE implementation looks for all intents and purposes like a digital finite impulse response (FIR) filter.

Continuous Time Linear Equalization

Figure 1: A CTLE implementation at the receiver end of a
serial-data channel seeks to boost higher frequencies while
not boosting noise any more than necessary

We've been looking at the broad topic of debugging high-speed serial links, and in that context, we're also touching on ways to improve signal performance on the receiver side. One of those ways is to implement continuous time linear equalization (CTLE).

The Effects of De-Emphasis on Eye Diagrams

Figure 1: This eye diagram of a serial-data stream as measured
at the receiver shows the effect a lossy channel has
on signal quality

Having discussed what transmit pre-emphasis is all about and the various ways in which it's implemented, it might be useful at this juncture to look at some examples of its application and the salutary effect it can have on the signal's eye diagram at the receiver end of the channel. Recall that there are two variations on pre-emphasis: de-emphasis and pre-shoot, which use different taps of a three-tap finite impulse response (FIR) filter to emphasize the last bit or the first bit of a bit sequence, respectively.

Introduction to Channel Equalization

Figure 1: Transmit pre-emphasis pre-distorts signals
in anticipation of the channel's effects

A number of factors can cause degradation of performance in a high-speed serial data link. Among them are inter-symbol interference (ISI) jitter, attenuation, reflections due to impedance mismatches, and insertion losses, to name a few. But fear not: There are techniques one may use to compensate for these losses known as equalization. We'll review the basics of channel equalization in today's post.