SDAIII and QualiPHY Software: Oscilloscope Eye Diagrams for Compliance and Debug

Figure 1. SDAIII enables eye diagrams and eye
measurements of four lanes of  streaming data.

Besides the serial TDME and TDMP options discussed earlier, there are other ways to generate eye diagrams on your Teledyne LeCroy oscilloscope for compliance testing and debug.

SDAIII Serial Data Analysis Software

SDAIII offers the most comprehensive eye diagram capabilities for Teledyne LeCroy oscilloscopes, with tools for optimizing the displayed eye that are especially useful to high-speed serial data analysis.

Which Virtual Probing Method to Use?

 

Virtual probing lets you "probe" where a probe
can't reach, or compensate signals by deembedding
or simulating devices and channels.

A great feature of Teledyne LeCroy oscilloscopes is the ability to apply virtual probing to compensate an input signal, whether by deembedding fixtures from the signal path, or simulating a “missing” component. It is especially helpful in cases where the signal is difficult to probe at the ideal location, hence the concept of “virtual” probing.

For example, because the JEDEC electrical specifications are defined at the balls of the DDR DRAM, it is often necessary to use the virtual probing capabilities of the oscilloscope to get the best representations of DDR signals to be analyzed with DDR Debug Toolkit or QualiPHY compliance software.

Here, we’ll give an overview of the virtual probing methods that become available with the installation of the SDAIII-CompleteLinQ or VirtualProbe software options, and some guidance as to which method is best to use in which case. And although we’ll show examples drawn from DDR analysis, the benefits of virtual probing are by no means limited to DDR signals.