You need to test, we're here to help.

You need to test, we're here to help.
Showing posts with label Visual Basic. Show all posts
Showing posts with label Visual Basic. Show all posts

01 February 2018

Getting The Most Out Of Your Oscilloscope: WaveScan and XDEV Custom Parameters

Using WaveScan to search for rare glitch events
Figure 1: Using WaveScan to search
for rare glitch events
In earlier posts about how to maximize your oscilloscope's utility, we've discussed how to properly capture a waveform, making measurements, and extracting more meaningful information from those measurements that might be readily apparent. Now we'll look at how to correlate anomalous behavior from a waveform with other waveforms we may have captured.

17 March 2016

The Challenges of GFCI Measurements

An example of a GFCI
Figure 1: An example
of a GFCI
The ubiquitous ground fault circuit interrupter (GFCI), a fast-acting circuit breaker, has saved countless individuals from serious injury or death when they've inadvertently entered the low-resistance ground path of an electrical device or outlet. It's important to measure precisely the amount of time that elapses from when the 60-Hz cycle is present to when the GFCI disables the ground path. Other tests include determining the start, stop, and duration of the GFCI's tripping time. Let's take a look at the challenges these measurements present.