TDME Primer: Automated Timing Measurements of USB-C Protocols

Figure 1: Interleaved decoding of USB-PD and DP-AUX signals.

Increasingly, serial data analysis is analysis of the interoperability of the many protocols that must perform together within interconnects and embedded systems. Nowhere is this more true than for USB-C® devices, which we’ll focus on in this post, although these examples of cross-protocol timing measurements could apply to any two protocols supported by our TDME and DME options.

The USB-C connector packs many protocols onto one, small pin set, and maintaining signal and power integrity is a compliance challenge. Besides high-speed data delivery, USB-PD (power delivery) provides flexible power distribution, while auxiliary sideband signals, like DisplayPort™, transport video. Troubleshooting these capabilities requires the ability to measure timing between serial data packets, as well as between data packets and analog signals. 

For example, DisplayPort over USB-C (DPoC) in alternate mode (alt-mode) can manifest as an interoperability failure if there is a timing issue between alt-mode initiation and the start of DP-AUX.