Debugging Automotive Ethernet Transmitter Output Droop

Everyone manufacturing devices used for Automotive Ethernet knows what compliance limits they must meet, based on the electrical test specification, but it is not always obvious where to look for the source of the problem when a compliance test fails. We'll provide more Automotive Ethernet debugging tips in future posts, but here is one that arose from a reader's question: namely, why the 45% limit on output droop for 100Base-T1, and what might cause the problem?

Figure 1: Automotive Ethernet electrical testing is performed at the transmitter connector and is largely governed by channel/connector recommendations.  Between the transmitter and the connector is a Low-Pass Filter and a Common Mode Choke both affecting signal droop.