Back to Basics: Three-Phase Sinusoidal Voltages

Figure 1: Three-phase AC voltages
consist of three voltage vectors

In a previous post, we briefly covered the basics of single- and three-phase AC power systems. Single-phase systems, as we've noted, comprise a single voltage vector with a magnitude (in VAC) and a phase angle. Of course, a three-phase voltage consists of three voltage vectors and three phase angles. This installment will go on to describe three-phase AC voltages in similarly brief fashion.

Back to Basics: Fundamentals of AC Line Power (Part II)

Figure 1: AC line voltage is a single-phase
vector that rotates at a given frequency

Having reviewed a broad definition of power, how it is generated and distributed, and how motors consume almost half of all generated power, we will now turn to a more detailed discussion of just what it is that we call "power." When we discuss "power," we're typically referring to what comes out of a wall socket: AC line, or sinusoidal, power.

Back to Basics: The Fundamentals of Power

Figure 1: 45% of worldwide power
consumption fuels motors

Ask any number of engineers to define "power" and you'll get any number of answers, and none of them would necessarily be wrong. Sometimes it's just a matter of perspective.

Dynamic Range, Signal Integrity, and ESD Pulses

Figure 1: Use your oscilloscope's full vertical range to
take full advantage of the ADC's resolution

Having considered the impact of sampling rate on ESD pulse measurements, let's now turn our attention to dynamic range and signal integrity. No matter what oscilloscope you use, it's important to make the most of the instrument's full vertical range to achieve maximum accuracy.

How Does Sampling Rate Affect ESD Pulse Measurements?

Figure 1: Characterization of an ESD pulse's rise time
depends largely on the oscilloscope's sampling rate

In continuing our look at ESD/EMC pulse measurements, it would be useful to consider how sampling rate figures into the equation. What sort of sampling rate makes sense to use for capturing an ESD pulse? The answer to that question depends primarily on your pulse's rise time.

Why IEEE's Pulse Definitions and ESD Pulses Don't Mix

Figure 1: The IEEE's pulse definitions, which don't fit
the bill for measuring ESD pulses

The IEEE's pulse definitions, found in the organization's Std 181-2011 that covers transitions, pulses, and related waveforms, set the bar for how pulse measurements are determined. These definitions, which are in the DNA of all oscilloscopes, are just the thing for measuring repetitive pulses such as clock signals but not so much for ESD/EMC measurement requirements. In this post, we'll discuss why that is and what you should do differently for measuring ESD pulses.

Making EMC/ESD Pulse Measurements

Figure 1: Oscilloscopes are used for
testing in the green-shaded boxes

There are many circumstances in which electromagnetic compatibility (EMC) and electrostatic discharge (ESD) testing are a fact of life. Many countries have adopted IEC international standards that dictate certain levels of immunity, as have the automotive, medical, military, and aerospace industries. In this post, we'll begin looking at how oscilloscopes figure into tests for both radiated and conducted EMC/ESD immunity.