Test Happens.

Figure 1. Virtual probing methods like VP@Rcvr can help remove reflections from signals probed mid-bus. Probing DDR signals can present some...

Figure 1. DDR DQ and DQS signals are in phase during a Read operation and out of phase during a Write operation. Whether you are debugging o...

Fig. 1. Modern, slim front panel. Most Teledyne LeCroy oscilloscopes are equipped with traditional front panel controls—knobs and buttons—th...

Fig 1. Rail droop in response to a load step is a typical case of mutual aggressors in a PDN. A third type of noise found in PDNs is what we...

Figure 1. Line set to "quiet low" shows ground bounce occurring as I/O driver switches. During an October 2020 webinar, Don’t Let ...

  Virtual probing lets you "probe" where a probe can't reach, or compensate signals by deembedding or simulating devices and c...

Figure 1. "Pollution" occurring on PDN traces. Board pollution is noise occurring on the packages and interconnects (traces and...