Test Happens - Teledyne LeCroy Blog

Test Happens.

29 August 2022

How to Choose the Best High-voltage Oscilloscope Probe in 5 Minutes

›
Figure 1: The High-voltage Probe Selection Guide color codes better or worse probe selections based on your answers to three, simple questio...
22 August 2022

Physical-Layer Collision Avoidance in 10Base-T1S Automotive Ethernet

›
Fig.1, 10Base-T1S PLCA cycle. If there is no data traffic (top), only BEACONs are seen on the bus.  Data from a node (bottom) will expand th...
15 August 2022

10Base-T1S Automotive Ethernet vs. 10Base-T1L Industrial Ethernet

›
Figure 1: 10Base-T1S and 10Base-T1L differ primarily in reach, encoding methods, topology and applications. 10Base-T1S, a variant of  Automo...
08 August 2022

Using TF-USB-C-HS for USB 3.2 PHY-Logic Layer Debug

›
Figure 1. USB 3.2 electrical decoding with ProtoSync view of protocol packets, captured using TF-USB-C-HS. Click on any image to enlarge it....
01 August 2022

Signal and Power Integrity Tutorial: Power Rail Probing for Rail Compression

›
Figure 3. Equivalent circuit of a typical CMOS I/O showing the connection from the on-die rails and the board-level test points. By Prof. Er...
25 July 2022

Signal and Power Integrity Tutorial: How PDN Design Affects Board-level Noise

›
Figure 1. Oscilloscope traces resulting from  measuring  a 3.3. V power rail with a 10x probe versus a coaxial connection, with an adjacent ...
18 July 2022

Six Principles of FFT Analysis Using Real-time Oscilloscopes

›
Figure 1. A 100 MHz sine wave in the time domain and its spectrum in the frequency domain showing the one peak at 100 MHz. Click on any imag...
‹
›
Home
View web version
© 2013-2022 Teledyne LeCroy, Inc., except where noted. Reproduction prohibited except by written permission.