Test Happens.

Figure 1: The 10x passive probe becomes a better measurement tool when we understand its limitations We began this series of posts on...

Figure 1: Probe, cable, and oscilloscope form a system that makes or breaks the accuracy of signal acquisitions Few aspects of using an...

Figure 1: DFE filter output is based on a linear combination of previous bit decisions In debugging high-speed serial links , one must b...

Figure 1: This cross section of a 100-MHz microstrip transmission line shows us how a return path should look We've been discussing...

Figure 1: The trigger pulse from the MCU is one clock cycle in width In earlier posts in this series, we've explained what ground b...

Figure 1: To configure an I/O driver as a quiet-low line, its output is connected directly to Vss on the die Ground bounce can plague...

Figure 1: Shown are five I/O drivers within a package driving signal lines on a PC board Designing and/or troubleshooting a system wit...