Test Happens - Teledyne LeCroy Blog

Test Happens.

18 May 2018

Examples of IoT DDR Debug Scenarios

›
Figure 1: Using the oscilloscope's Track math function can help pin down timing anomalies Our last post considered some broad aspe...
15 May 2018

Debugging DDR Memory on IoT Devices

›
Figure 1: Embedded systems such as IoT devices often require chip interposers to gain access to signal lines on DDR memory Internet of ...
10 May 2018

Debugging Ethernet, SATA, and PCIe for IoT Devices

›
Figure 1: A generic IoT block diagram shows serial-data links in blue In our ongoing review of debugging serial-data standards for Inte...
08 May 2018

Debugging CANbus For IoT Devices

›
Figure 1: Temperature data from thermocouples is shown both encoded and decoded on the oscilloscope's display A myriad of serial-dat...
04 May 2018

Debugging Low-Speed Serial Data on IoT Devices

›
Figure 1: Serial-data links handle traffic between ICs and peripheral devices in the IoT world Our last post discussed the difficulties...
02 May 2018

Acquiring and Characterizing IoT Sensor Signals

›
Figure 1: IoT devices use many sensors to collect data about their ambient environment If we recall our earlier post with its definitio...
30 April 2018

Investigating IoT Wireless Signals (Part II)

›
Figure 1: This screen capture depicts frequency demodulation and subsequent Manchester decoding of the bit stream Internet of Things (I...
‹
›
Home
View web version
© 2013-2022 Teledyne LeCroy, Inc., except where noted. Reproduction prohibited except by written permission.